Беспроводной маршрутизатор серии n, скорость до 150 мбит/с

ДЛЯ ОНОВЛЕННЯ

ВАЖЛИВО: Щоб уникнути проблем при оновленні ПЗ, будь ласка, прочитайте наступну інформацію по процедурі оновлення.

Перевірте відповідність апаратної версії і версії ПЗ. Використання невірної версії ПЗ може пошкодити ваш пристрій і анулювати гарантію. (Зазвичай V1.x = V1)

НЕ рекомендується встановлювати версію ПО, не призначену для вашого регіону. Натисніть тут для вибору регіону і  завантажте найбільш актуальну версію програмного забезпечення.

• НЕ відключайте живлення під час процесу оновлення, оскільки це може завдати шкоди маршрутизатору
• НЕ оновлюйте ПЗ маршрутизатора по Wi-Fi, за винятком тих випадків, коли це є єдиним можливим способом.
• Рекомендується, щоб всі користувачі припинили використовувати всі інтернет-додатки на комп’ютері або відключили мережевий кабель від клієнтських пристроїв перед оновленням. 

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Usar Firmware de Terceros en los Productos de TP-Link

Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.

Abrir el Código Fuente Para Programadores (GPL)

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence — Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o «LGPL» (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

Preguntas Frecuentes

• ¿Cómo puedo cambiar la dirección IP del router inalámbrico TP-Link?
  08-04-20161417434

• ¿Cómo puedo abrir los puertos de mi router inalámbrico TP-Link?
  08-04-2016663741

• ¿Cómo puedo abrir los puertos de mi router inalámbrico TP-Link para Xbox Live?
  08-04-2016148463

• Why port forwarding feature is not working on my router?
  07-01-2020218640

• ¿Cómo Configurar el router N de TP-Link como un Punto de Acceso Inalámbrico?
  08-04-20163417424

• Cómo restablecer los productos de TP-Link con el botón WPS/RESET a las configuraciones predeterminadas de fábrica
  08-04-20162300308

• ¿Cómo puedo configurar la dirección Clone MAC en mi router inalámbrico TP-Link?
  08-04-2016165302

• ¿Por qué no tengo acceso a Internet después de conectarme de manera exitosa a una red inalámbrica?
  08-04-2016898834

• How to use bandwidth control on TP-Link wireless router?
  09-06-2019776856

• How to Upgrade the firmware version of TP-Link Wireless Router?
  09-06-20191122740

• Como ubicar o cambiar la contraseña inalámbrica de los productos TP-Link
  04-19-20192016188

• ¿Cómo puedo configurar la administración remota de mi router inalámbrico TP-Link?
  08-04-2016526912

• How to configure Wireless MAC address filter on wireless router?
  04-18-2019464662

• ¿Cómo puedo asegurar/proteger mi red inalámbrica mediante el uso de WPA-PSK/WPA2-PSK en el Router inalámbrico TP-Link 11N?
  08-04-2016404760

• ¿Por qué mi Router de TP-Link obtiene la dirección IP de Internet, pero no el acceso a Internet? (Para Conexión de Banda Ancha por Cable o DSL)
  08-04-2016258362

• How to improve my wireless speed or range?
  04-17-2019695447

• ¿Por qué no tengo acceso a Internet después de conectarse con éxito a la red inalámbrica?
  08-04-2016302952

• ¿Cómo veo el registro del sistema del Router inalámbrico TP-Link?
  08-04-2016242364

• How to do troubleshooting from the system log when PPPoE connection fails?
  04-17-201979255

• How to install TP-Link wireless router to work with a DSL Modem (PPPoE)?
  04-17-20191431588

• Application Requirement/Choose WAN Connection Type on my TP-Link router
  04-17-201964755

• Cómo configurar la reserva de direcciones en el Router inalámbrico TP-Link
  08-04-2016311140

• How do I install TP-Link router to work with a Cable Modem?
  04-17-2019655487

• ¿Que hacer en caso de olvidar la contraseña de acceso del router inalámbrico de TP-Link?
  08-04-20162389373

• Por qué no puedo acceder a Internet después de conectar el Router TP-Link de mi modem
  08-04-20162309970

• ¿Cómo puedo configurar la red inalámbrica básica para mi router inalámbrico TP-Link?
  08-04-20165290774

• What should I do if internet speed is slow when the device is connected to the router’s wireless network
  04-03-2019433073

• What can I do if the wireless network is unstable via my wireless router/modem router?
  04-03-2019722076

• ¿Cómo enlazar las direcciones IP y MAC en el router TP-Link?
  08-04-2016226925

• How to find your TP-Link Router’s IP address?
  03-07-2019886216

• Application Requirement/Internet Access Control
  10-17-201765482

• Cómo configurar la función WDS en los Routers TP-Link 11n
  08-04-20161266622

• How to configure Static Routing on wireless routers?
  05-10-2017219699

• ¿Cómo Utilizar la Función de Filtro de Internet para Menores en el Router Inalámbrico N?
  08-04-2016274965

• How do I install a TP-Link router to work with a DSL modem (Dynamic IP)?
  12-27-2016519811

• ¿Cómo encontrar la clave de la conexión inalámbrica en el Router 11N?
  08-04-2016432536

• Cómo configurar el control de acceso para el bloqueo del sitio web
  08-04-2016574486

• ¿Por qué no puedo ingresar al sistema en la Página de Administración con NOD 32 ESET?
  08-04-201646424

• ómo configurar el DNS dinámico en el router inalámbrico
  08-04-2016325691

• ¿Cómo puedo asegurar/proteger mi red inalámbrica mediante el encriptado WEP en el Router inalámbrico TP-Link 11N?
  08-04-2016147378

• ¿Cómo puedo reducir el tamaño de MTU de mi router TP-Link?
  08-04-201676351

• ¿Cómo Configurar DDNS (No-IP) en un Router Inalámbrico de TP-Link?
  08-04-2016172501

• Cómo comprobar las conexiones de los componentes de la red en el router
  08-04-2016122927

• How to protect your TP-Link network devices from potential attacks?
  07-29-201639565

• How do I install TP-Link wireless router to work with a Modem (Static IP)?
  05-25-2016171048

• Application Requirement/ Parental Control
  03-20-201431946

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

SSS

• How to find or change the wireless password on the TP-Link products
  08-26-20202035737

• How do I change the IP address of a TP-Link Wireless Router ?
  07-24-20201424121

• How to set up Port Forwarding feature on my TP-Link wireless Router? (Green UI)
  07-01-2020667680

• How to set up Port forwarding feature on my TP-Link Wireless Router for Xbox Live?
  07-01-2020149332

• Why port forwarding feature is not working on my router?
  07-01-2020220839

• How to configure TP-Link Router in Access Point mode?（case1)
  06-16-20203444489

• How to reset TP-Link router to factory defaults
  11-27-20192324168

• How do I configure MAC Address Clone on my TP-Link Wireless Router(green UI)?
  09-27-2019166616

• Why cannot I access the Internet after successfully connected to the TP-Link router’s wireless network(Windows OS)?
  09-06-2019907907

• How to use bandwidth control on TP-Link wireless router?
  09-06-2019784290

• How to Upgrade the firmware version of TP-Link Wireless Router?
  09-06-20191132041

• How do I configure Remote Management for my TP-Link Wireless Router?
  04-18-2019531171

• How to configure Wireless MAC address filter on wireless router?
  04-18-2019468035

• How do I secure/protect my wireless network by using WPA-PSK/WPA2-PSK on TP-Link Wireless 11N Router?
  04-18-2019406584

• Why my TP-Link Router gets a WAN IP from the modem but no internet access？
  04-18-2019261180

• How to improve my wireless speed or range?
  04-17-2019702172

• Why cannot I access the Internet after successfully connected to the TP-Link router’s wireless network(MAC OS)?
  04-17-2019305128

• How to view System Log of TP-Link wireless Router?
  04-17-2019245796

• How to do troubleshooting from the system log when PPPoE connection fails?
  04-17-201980279

• How to install TP-Link wireless router to work with a DSL Modem (PPPoE)?
  04-17-20191442542

• Application Requirement/Choose WAN Connection Type on my TP-Link router
  04-17-201965295

• How to configure Address Reservation on TP-Link wireless router
  04-17-2019312988

• How do I install TP-Link router to work with a Cable Modem?
  04-17-2019661661

• What can I do if I forget the login password of TP-Link Wireless Router?
  04-17-20192414183

• Why my TP-Link router can not get WAN parameters from my modem?
  04-03-20192329526

• How do I configure the basic wireless settings for my TP-Link 11N Wireless Router?
  04-03-20195334164

• What should I do if internet speed is slow when the device is connected to the router’s wireless network
  04-03-2019439668

• What can I do if the wireless network is unstable via my wireless router/modem router?
  04-03-2019731909

• How to bind IP Address and MAC Address on TP-Link Router?
  04-02-2019228616

• How to find your TP-Link Router’s IP address?
  03-07-2019910708

• Application Requirement/Internet Access Control
  10-17-201765968

• How to configure WDS function on TP-Link Wireless Routers(green UI)
  09-14-20171276109

• How to configure Static Routing on wireless routers?
  05-10-2017221560

• How to use Parental Control function on Wireless router?
  02-04-2017276806

• How do I install a TP-Link router to work with a DSL modem (Dynamic IP)?
  12-27-2016523033

• How to find the wireless key on the 11N router?
  09-13-2016435193

• How to Setup DDNS(DynDNS) on Wireless Router?
  07-29-2016327107

• How to protect your TP-Link network devices from potential attacks?
  07-29-201639732

• How do I install TP-Link wireless router to work with a Modem (Static IP)?
  05-25-2016172332

• How to Setup DDNS (No-IP) on TP-Link Wireless Router?
  05-25-2016173267

• How to set up access control for website blocking on TP-Link Wireless Router (older green UI)?
  05-25-2016577823

• Why cannot log into the Management Page with NOD 32 ESET?
  01-22-201546660

• How to confirm whether the router is connected to internet through Diagnostic function?
  04-15-2014124112

• Application Requirement/ Parental Control
  03-20-201432144

• How do I secure/protect my wireless network by using WEP encryption on TP-Link wireless 11N Router?
  02-28-2013148516

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

Открытый исходный код для программистов (GPL)

Следующая информация предназначена для программистов и не представляет значимость для большинства конечных пользователей продукции TP-Link.
Продукция TP-Link содержит код, разработанный третьими лицами, включая код, разработанный в соответствии с Универсальной общественной лицензией GNU (GPL) версии 1/версии 2/версии 3 или в соответствии со Стандартной общественной лицензией ограниченного применения GNU (LGPL). Вы можете использовать соответствующее программное обеспечение на условиях лицензии GPL.

Вы можете  просмотреть, распечатать и загрузить соответствующие условия лицензии GPL здесь.  В Центре исходных кодов GPL вы получаете для загрузки исходный код GPL соответствующего ПО, используемого в продукции TP-Link, а также прочую информацию, включая список ПО TP-Link, содержащего исходный код GPL. 

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Відкритий вихідний код для програмістів (GPL)

Наступна інформація призначена для програмістів і не представляє значимість для більшості кінцевих користувачів продукції TP-Link.
Продукція TP-Link містить код, розроблений третіми особами, включаючи код, розроблений відповідно до Універсальної громадської ліцензії GNU (GPL) версії 1 / версії 2 / версії 3 або відповідно до Стандартної громадської ліцензії обмеженого використання GNU (LGPL). Ви можете використовувати відповідне програмне забезпечення на умовах ліцензії GPL.

Ви можете переглянути, роздрукувати і завантажити відповідні умови ліцензії GPL  тут.  У Центрі вихідних кодів GPL ви отримуєте для завантаження вихідний код GPL відповідного забезпечення, яке використовується в продукції TP-Link, а також іншу інформацію, включаючи список ПЗ TP-Link, що містить вихідний код GPL.