Загрузить для td-w8960n v8

Programcılar İçin Açık Kaynak Kodu (GPL)

Aşağıdaki bilgiler programcılar içindir ve çoğu TP-Link ev kullanıcısı için gereksizdir.

TP-Link’in ürünleri kısmen GNU Genel Kamu Lisansı («GPL»), Version 1 / Version 2 / Version 3 veya GNU Lesser General Public License’a («LGPL») tabi yazılım kodu da dahil olmak üzere, üçüncü şahıslar tarafından geliştirilen yazılım kodunu içerir. İlgili yazılım koşulunu GPL lisans koşullarını izlemek için kullanabilirsiniz.

İlgili GPL lisans koşullarını buradan inceleyebilir, yazdırabilir ve indirebilirsiniz. TP-Link ürünlerinde kullanılan ilgili yazılımın GPL kaynak kodlarını, GPL Kod Merkezi altında GPL yazılım kodunu içeren TP-Link yazılımının bir listesi de dahil olmak üzere, doğrudan indirmek ve daha fazla bilgi almak için alırsınız.

Güncelleme İçin

Nano адаптер powerline стандарта av500

ÖNEMLİ: Güncelleme hatalarını önlemek için, güncelleme işlemine devam etmeden önce aşağıdakileri okuyunuz

Cihaz yazılımı sürümü için, cihazınızın donanım sürümünü doğrulayın. Yazılımın yanlış güncellenmesi cihazınıza zarar verebilir ve garantiyi geçersiz kılabilir. (Normalde V1.x = V1)
Bölgeniz için olmayan bir firmware güncellemesi önerilmemektedir. Bölgenizi seçmek ve en uygun firmware sürümünü indirmek için lütfen burayı tıklayın. (Örneğin, AB’nin ve ABD’nin üretici yazılımı farklı donanım sürümleridir)
Ürünü kalıcı bir hasara uğratmamak için güncelleme işlemi sırasında gücü KAPATMAYIN.
Yazılımı kablosuz bağlantı yoluyla GÜNCELLEMEYİN.
Kullanıcıların bilgisayardaki tüm Internet uygulamalarını durdurmaları veya güncellemeden önce Internet hattını cihazdan çıkarmanız önerilir.
Güncellemeden önce indirdiğiniz dosyayı ayıklamak için WinZIP veya WinRAR gibi yazılımlar kullanın.

TD-W8960N(TR)_V6_160407

Yayın Tarihi: 2016-04-07

Dil: Türkçe

Dosya Boyutu: 5.74 MB

Notes:

for TD-W8960N(TR)6.0 only

TD-W8960N_V6_151019

Yayın Tarihi: 2015-10-19

Dil: İngilizce

Dosya Boyutu: 5.87 MB

Modifications and Bug Fixes:

NEW Features/Enhancement:
   1.Updated the ISP list.
   2.Added the enble/disable switch for TR069.
   3.Added ARP binding function
   4.Added switch option for Firwall in PPP dial up connetion.
   5.Increased the pre-share key length from 15 to 255 in IPsec
   6.Added Iran for the country option in wireless setting.
Bug fixed:
   1.Fixed the WAN configuration error when setting 31 special characters password for PPPOE/L2TP/PPTP in the quick setup panel.
   2. Fixed failure when setting 32 characters password for L2TP/PPTP dial up.

Notes:

1. For TD-W8960N_V6.
2. Your device’s configuration won’t be lost after upgrading.

TD-W8960N_V6_150619_TR

Yayın Tarihi: 2015-06-19

Dil: Türkçe

Dosya Boyutu: 5.74 MB

Notes:

for TD-W8960N（TR）6.0

Open Source Code For Programmers (GPL)

Ac1750 wireless dual band gigabit router

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

Open Source Code For Programmers (GPL)

Ac1900 wireless mu-mimo gigabit router

Открытый исходный код для программистов (GPL)

Следующая информация предназначена для программистов и не представляет значимость для большинства конечных пользователей продукции TP-Link.
Продукция TP-Link содержит код, разработанный третьими лицами, включая код, разработанный в соответствии с Универсальной общественной лицензией GNU (GPL) версии 1/версии 2/версии 3 или в соответствии со Стандартной общественной лицензией ограниченного применения GNU (LGPL). Вы можете использовать соответствующее программное обеспечение на условиях лицензии GPL.

Вы можете просмотреть, распечатать и загрузить соответствующие условия лицензии GPL здесь. В Центре исходных кодов GPL вы получаете для загрузки исходный код GPL соответствующего ПО, используемого в продукции TP-Link, а также прочую информацию, включая список ПО TP-Link, содержащего исходный код GPL.

Open Source Code For Programmers (GPL)

Güncelleme İçin

ÖNEMLİ: Güncelleme hatalarını önlemek için, güncelleme işlemine devam etmeden önce aşağıdakileri okuyunuz

Cihaz yazılımı sürümü için, cihazınızın donanım sürümünü doğrulayın. Yazılımın yanlış güncellenmesi cihazınıza zarar verebilir ve garantiyi geçersiz kılabilir. (Normalde V1.x = V1)
Bölgeniz için olmayan bir firmware güncellemesi önerilmemektedir. Bölgenizi seçmek ve en uygun firmware sürümünü indirmek için lütfen burayı tıklayın. (Örneğin, AB’nin ve ABD’nin üretici yazılımı farklı donanım sürümleridir)
Ürünü kalıcı bir hasara uğratmamak için güncelleme işlemi sırasında gücü KAPATMAYIN.
Yazılımı kablosuz bağlantı yoluyla GÜNCELLEMEYİN.
Kullanıcıların bilgisayardaki tüm Internet uygulamalarını durdurmaları veya güncellemeden önce Internet hattını cihazdan çıkarmanız önerilir.
Güncellemeden önce indirdiğiniz dosyayı ayıklamak için WinZIP veya WinRAR gibi yazılımlar kullanın.

TD-W8960N(EU)_V8_171221

Yayın Tarihi: 2018-01-31

Dil: İngilizce

Dosya Boyutu: 2.14 MB

New Features/Enhancement:
1. Modified the WiFi driver to enhance WiFi stability.
2. Improved radio transmit power.
3. Optimized the config process.
4. Removed the default Bridge connection.

Notes:

For TD-W8960N 8.0.

Note:
1. For TL-MR3020(EU)_V3.20.
2. Your device’s configuration won’t be lost after upgrading,which means you needn’t to configure your device again after upgrading

TD-W8960N(TR)_V8_170215

Yayın Tarihi: 2017-02-15

Dil: Türkçe

Dosya Boyutu: 2.07 MB

Notes:

For TD-W8960N(TR)8.0

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TD-W8960N_V5_141107

Published Date: 2014-11-07

Language: English

File Size: 5.82 MB

Modifications and Bug Fixes:

New Features/Enhancement：(1)Updated country&ISP info lists.
Bug Fixed：(1)Fixed the bug that the Source IP Address can not be saved in IP Filter when using the formart of ‘IP+Mask’ ;(2)Fixed the bug that DST setting varied itself sometimes;(3)Fixed the bug that wireless network stop working after rebooting the router if the wireless schedule was configured.

Notes:

For TD-W8960N V5

TD-W8960N_V5_140815

Published Date: 2014-08-15

Language: English

File Size: 5.82 MB

Modifications and Bug Fixes:

Fixed problem occurred in production process.

Notes:

For TD-W8960N(UN)V5

TD-W8960N_V5_140804

Published Date: 2014-08-04

Language: English

File Size: 5.82 MB

Modifications and Bug Fixes:

Fixed tr-069 issue
Fixed wireless region issue
Fixed DNS proxy issue
Fixed the issue that router can’t reconnect automatically if username or password is wrong
Fixed other bugs and issues

Notes:

For TD-W8960N_V5

Programcılar İçin Açık Kaynak Kodu (GPL)

Aşağıdaki bilgiler programcılar içindir ve çoğu TP-Link ev kullanıcısı için gereksizdir.

İlgili programlar herhangi bir garanti olmaksızın; hatta BELİRLİ BİR AMAÇ İÇİN UYGUNLUK VEYA PAZARLANABİLİR zımni garanti olmaksızın dağıtılır. Daha fazla ayrıntı için ilgili GNU Genel Kamu Lisansı’na bakınız.

Programcılar İçin Açık Kaynak Kodu (GPL)

Aşağıdaki bilgiler programcılar içindir ve çoğu TP-Link ev kullanıcısı için gereksizdir.

Güncelleme İçin

ÖNEMLİ: Güncelleme hatalarını önlemek için, güncelleme işlemine devam etmeden önce aşağıdakileri okuyunuz

Cihaz yazılımı sürümü için, cihazınızın donanım sürümünü doğrulayın. Yazılımın yanlış güncellenmesi cihazınıza zarar verebilir ve garantiyi geçersiz kılabilir. (Normalde V1.x = V1)
Bölgeniz için olmayan bir firmware güncellemesi önerilmemektedir. Bölgenizi seçmek ve en uygun firmware sürümünü indirmek için lütfen burayı tıklayın. (Örneğin, AB’nin ve ABD’nin üretici yazılımı farklı donanım sürümleridir)
Ürünü kalıcı bir hasara uğratmamak için güncelleme işlemi sırasında gücü KAPATMAYIN.
Yazılımı kablosuz bağlantı yoluyla GÜNCELLEMEYİN.
Kullanıcıların bilgisayardaki tüm Internet uygulamalarını durdurmaları veya güncellemeden önce Internet hattını cihazdan çıkarmanız önerilir.
Güncellemeden önce indirdiğiniz dosyayı ayıklamak için WinZIP veya WinRAR gibi yazılımlar kullanın.

TD-W8960N_V1_V3_111108

Yayın Tarihi: 2011-11-08

Dil: İngilizce

Dosya Boyutu: 3.89 MB

Modifications and Bug Fixes:

Add supports of WEB ALG switch;
Add supports of 1500 Bytes MTU under PPPoA mode;
Fixed Chrome update issue;
Fixed Australia TPG PPPoE issue;
Fixed TCP MSS configuration issue;
Fixed Traffic Control needs reboot to take effect under PPPoA mode;

Notes:

For TD-W8960N v1 and v3 hardware version.

TD-W8960N_V1_V3_110620

Yayın Tarihi: 2011-06-20

Dil: İngilizce

Dosya Boyutu: 3.87 MB

Modifications and Bug Fixes:

Upgrade software version from v1 to v3;
Added supports of full remote management by admin account;
Improved Quick Setup keep display configured information;
Added supports of NAT loopback function;
Added supports of Traffic Control (Bandwidth Control) function;
Added supports of IPSec Keep Alive function;
Added supports of FQDN as IPSec identifier;
Fixed DDNS account can not use “#” as password;
Improved URL filter module;
Improved some WEB description;

Notes:

For v1 and v3 hardware version

ДЛЯ ОБНОВЛЕНИЯ

ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления. Проверьте соответствие аппаратной версии и версии ПО

Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)

Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)

НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.

НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением.

Примечание: Конфигурационные файлы могут быть некорректно установлены на новые версии встроенного ПО, требующие сброса на заводские настройки.

Рекомендации по обновлению ПО: Wi-Fi роутер, Wi-Fi роутер с модемом ADSL2+, Усилитель Wi-Fi сигнала

TD-W8968_V1_131226

Дата публикации: 2013-12-26

Язык: Английский

Размер файла: 6.26 MB

Modifications and Bug Fixes:

Fixed the compatibility problem between media server and PlayStation 3.
Fixed a bug when adding virtual server items on 3G interface, the items cannnot be displayed.
Fixed a bug when leaving the internal port blank,the virtual server item cannot be saved.
Fixed a bug when unchecked anonymous access, file server cannot be accessed by some Android smb apps.
Fixed a bug when opening the Firewall and selecting Deny as Default Filtering Rules, lan devices cannot communicate with each other.
Improved security working mechanism.

Notes:

After upgrading this firmware, the device will be restored to factory defaults, and cannot be restored from the previous backuped configuration settings.Firmware cannot be downgraded after this firmware.

TD-W8968_V1_130217

Дата публикации: 2013-02-17

Язык: Английский

Размер файла: 5.29 MB

Modifications and Bug Fixes:

Fixed the problem that you can’t change the subnet mask of LAN.
Fixed the problem that this modem is not fully compatible with bonjour.
Fixed the problem that you can’t input more than 15 characters in NTP input field.
Fixed the problem that sometimes you can’t enable IPv6 in WAN.
Added no-ip choice in DDNS.
Added the function of NAT loopback.

Notes:

For TD-W8968 v1

TD-W8968_V1.0_121105_FI

Дата публикации: 2012-11-05

Язык: Английский

Размер файла: 5.29 MB

Modifications and Bug Fixes:

The PVC which can get WAN IP will be set as default route for Internet;
Pre-configure 2 PVCs:a. 0/100, Dynamic IP b. 0/33, Dynamic IP
LAN Multicast = IGMP V2;
Disable all WAN services;
WLAN is pre-secured and the password is the PIN;
Quick Setup:PVC=0/100,Dynamic IP;
Default Wireless Area: Finland,Time Zone: GMT+02:00;
ADSL Mode: Auto Syn-up;ADSL Type: Annex A/I/J/L/M;
Dynamic IP access IP mode:»»Get IP with Unicast.

Notes:

1.Special firmware only for Finland customers 2.For TD-W8968 V1.0.0

Open Source Code For Programmers (GPL)

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TD-W8960N_V1_V3_111108

Published Date: 2011-11-08

Language: English

File Size: 3.89 MB

Modifications and Bug Fixes:

Add supports of WEB ALG switch;
Add supports of 1500 Bytes MTU under PPPoA mode;
Fixed Chrome update issue;
Fixed Australia TPG PPPoE issue;
Fixed TCP MSS configuration issue;
Fixed Traffic Control needs reboot to take effect under PPPoA mode;

Notes:

For TD-W8960N v1 and v3 hardware version.

TD-W8960N_V1_V3_110620

Published Date: 2011-06-20

Language: English

File Size: 3.751 MB

Modifications and Bug Fixes:

Upgrade software version from v1 to v3;
Added supports of full remote management by admin account;
Improved Quick Setup keep display configured information;
Added supports of NAT loopback function;
Added supports of Traffic Control (Bandwidth Control) function;
Added supports of IPSec Keep Alive function;
Added supports of FQDN as IPSec identifier;
Fixed DDNS account can not use “#” as password;
Improved URL filter module;
Improved some WEB description;

Notes:

For v1 and v3 hardware version

TD-W8960N_V1_100825

Published Date: 2010-08-25

Language: English

File Size: 3.614 MB

Modifications and Bug Fixes:

Fix some problems about IPSec.
Fix some bugs about IPoE.
Fix display problem on wireless page.
Add support to No-IP DDNS.
Time can be set manualy or sync with PC.

Open Source Code For Programmers (GPL)

Programcılar İçin Açık Kaynak Kodu (GPL)

Aşağıdaki bilgiler programcılar içindir ve çoğu TP-Link ev kullanıcısı için gereksizdir.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TD-W8960N_V6_151019

Published Date: 2015-10-19

Language: English

File Size: 5.87 MB

Modifications and Bug Fixes:

Notes:

1. For TD-W8960N_V6.
2. Your device’s configuration won’t be lost after upgrading.

TD-W8960N_V6_150522

Published Date: 2015-05-22

Language: English

File Size: 5.77 MB

Modifications and Bug Fixes:

Bug Fixed:
1.Fixed the bug that when choosing ISP which contains Russian character during Quick Setup,an error message is pop-up.

Notes:

1. For TD-W8960N_V6
2. Your device’s configuration won’t be lost after upgrading,which means you needn’t to configure your device again after upgrading.

TD-W8960N_V6_150228

Published Date: 2015-02-28

Language: English

File Size: 5.76 MB

Modifications and Bug Fixes:

First firmware release of TD-W8960N V6

Notes:

For TD-W8960N V6

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TD-W8960N_V6_151019

Published Date: 2015-10-19

Language: English

File Size: 5.87 MB

Modifications and Bug Fixes:

Notes:

1. For TD-W8960N_V6.
2. Your device’s configuration won’t be lost after upgrading.

TD-W8960N_V6_150522

Published Date: 2015-05-22

Language: English

File Size: 5.77 MB

Modifications and Bug Fixes:

Bug Fixed:
1.Fixed the bug that when choosing ISP which contains Russian character during Quick Setup,an error message is pop-up.

Notes:

1. For TD-W8960N_V6
2. Your device’s configuration won’t be lost after upgrading,which means you needn’t to configure your device again after upgrading.

TD-W8960N_V6_150228

Published Date: 2015-02-28

Language: English

File Size: 5.76 MB

Modifications and Bug Fixes:

First firmware release of TD-W8960N V6

Notes:

For TD-W8960N V6

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TD-W8960N(EU)_V8_171221

Published Date: 2018-01-31

Language: English

File Size: 2.14 MB

New Features/Enhancement:
1. Modified the WiFi driver to enhance WiFi stability.
2. Improved radio transmit power.
3. Optimized the config process.
4. Removed the default Bridge connection.

Notes:

For TD-W8960N 8.0.

Note:
1. For TL-MR3020(EU)_V3.20.
2. Your device’s configuration won’t be lost after upgrading,which means you needn’t to configure your device again after upgrading

ДЛЯ ОНОВЛЕННЯ

ВАЖЛИВО: Щоб уникнути проблем при оновленні ПЗ, будь ласка, прочитайте наступну інформацію по процедурі оновлення.

Перевірте відповідність апаратної версії і версії ПЗ. Використання невірної версії ПЗ може пошкодити ваш пристрій і анулювати гарантію. (Зазвичай V1.x = V1)

НЕ рекомендується встановлювати версію ПО, не призначену для вашого регіону. Натисніть тут для вибору регіону і завантажте найбільш актуальну версію програмного забезпечення.

НЕ відключайте живлення під час процесу оновлення, оскільки це може завдати шкоди маршрутизатору
НЕ оновлюйте ПЗ маршрутизатора по Wi-Fi, за винятком тих випадків, коли це є єдиним можливим способом.
Рекомендується, щоб всі користувачі припинили використовувати всі інтернет-додатки на комп’ютері або відключили мережевий кабель від клієнтських пристроїв перед оновленням.

TD-W8960N(RU)_V6_160426
Дата публікації: 2016-04-26	Мова: Русский	Розмір файлу: 5.79 MB

TD-W8960N_V6_151019

Дата публікації: 2015-10-19

Мова: Английский

Розмір файлу: 5.87 MB

Modifications and Bug Fixes:

Notes:

1. For TD-W8960N_V6.
2. Your device’s configuration won’t be lost after upgrading.

TD-W8960N_V6_150522

Дата публікації: 2015-05-22

Мова: Английский

Розмір файлу: 5.77 MB

Modifications and Bug Fixes:

Bug Fixed:
1.Fixed the bug that when choosing ISP which contains Russian character during Quick Setup,an error message is pop-up.

Notes:

1. For TD-W8960N_V6
2. Your device’s configuration won’t be lost after upgrading,which means you needn’t to configure your device again after upgrading.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TD-W8960N_V4_140228

Published Date: 2014-02-28

Language: English

File Size: 5.25 MB

Modifications and Bug Fixes:

Fixed bonjour issue.
The web management interface will be blocked for 10 miuntes after trying wrong username or password for 5 times.
Add MTU settings in IPOE and IPOA.
Fixed UPNP issue.
Fixed the issue that SIP ALG function doesn’t take effect until it reboot.

Notes:

FOR TD-W8960N V4

TD-W8960N_V4_120912

Published Date: 2012-09-12

Language: English

File Size: 5.11 MB

Modifications and Bug Fixes:

Fixed the issue that MTU value couldn’t be saved after reboot;
Fixed SNMP Set related issue;
Fixed VPN page error.
Fixed Wireless bridge channel issue;
Add a note that existing Virtual Server rules might be deleted after quick setup;
Improved MAC Filter function.

Notes:

For TD-W8960N v4

TD-W8960N_V4_120609

Published Date: 2012-06-09

Language: English

File Size: 5.11 MB

Modifications and Bug Fixes:

First firmware for TD-W8960N V4 hardware version

Notes:

For TD-W8960N V4

Відкритий вихідний код для програмістів (GPL)

Наступна інформація призначена для програмістів і не представляє значимість для більшості кінцевих користувачів продукції TP-Link.
Продукція TP-Link містить код, розроблений третіми особами, включаючи код, розроблений відповідно до Універсальної громадської ліцензії GNU (GPL) версії 1 / версії 2 / версії 3 або відповідно до Стандартної громадської ліцензії обмеженого використання GNU (LGPL). Ви можете використовувати відповідне програмне забезпечення на умовах ліцензії GPL.

Ви можете переглянути, роздрукувати і завантажити відповідні умови ліцензії GPL тут. У Центрі вихідних кодів GPL ви отримуєте для завантаження вихідний код GPL відповідного забезпечення, яке використовується в продукції TP-Link, а також іншу інформацію, включаючи список ПЗ TP-Link, що містить вихідний код GPL.