Настройка репитера tp-link tl-wa850re
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE_V1.00_121119
|
|
Published Date: 2012-11-19
|
Language: English
|
File Size: 3.55 MB
|
|
Modifications and Bug Fixes:
- Only support Range Extender mode;
- Improved the usability of Quick Setup;
- Added supports of Smart DHCP and Dynamic LAN IP;
- Added supports of switching different wireless networks by profile module;
- Modified the rule of reset button to immediately take effect.
Notes:
For TL-WA850RE(UK&EU) V1.0 only, not applicable for other version.
|
|
ДЛЯ ОНОВЛЕННЯ
ВАЖЛИВО: Щоб уникнути проблем при оновленні ПЗ, будь ласка, прочитайте наступну інформацію по процедурі оновлення.
Перевірте відповідність апаратної версії і версії ПЗ. Використання невірної версії ПЗ може пошкодити ваш пристрій і анулювати гарантію. (Зазвичай V1.x = V1)
НЕ рекомендується встановлювати версію ПО, не призначену для вашого регіону. Натисніть тут для вибору регіону і завантажте найбільш актуальну версію програмного забезпечення.
- НЕ відключайте живлення під час процесу оновлення, оскільки це може завдати шкоди маршрутизатору
- НЕ оновлюйте ПЗ маршрутизатора по Wi-Fi, за винятком тих випадків, коли це є єдиним можливим способом.
- Рекомендується, щоб всі користувачі припинили використовувати всі інтернет-додатки на комп’ютері або відключили мережевий кабель від клієнтських пристроїв перед оновленням.
|
TL-WA850RE(EU)_V7_200403
|
|
Дата публікації: 2020-04-22
|
Мова: Багатомовний
|
Розмір файлу: 1.23 MB
|
|
Modifications and Bug Fixes:
1. Improve the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(EU)_V7_191212
|
|
Дата публікації: 2019-12-31
|
Мова: Багатомовний
|
Розмір файлу: 1.62 MB
|
|
Modifications and Bug Fixes:
New features/Enhancement:
1. Optimize the Daylight Saving Time function.
2. Improve the stability and performance of device.
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(EU)_V7_191111
|
|
Дата публікації: 2019-11-27
|
Мова: Багатомовний
|
Розмір файлу: 1.22 MB
|
|
Modifications and Bug Fixes:
1. Improved wireless compatibility.
|
|
Programcılar İçin Açık Kaynak Kodu (GPL)
Aşağıdaki bilgiler programcılar içindir ve çoğu TP-Link ev kullanıcısı için gereksizdir.
TP-Link’in ürünleri kısmen GNU Genel Kamu Lisansı («GPL»), Version 1 / Version 2 / Version 3 veya GNU Lesser General Public License’a («LGPL») tabi yazılım kodu da dahil olmak üzere, üçüncü şahıslar tarafından geliştirilen yazılım kodunu içerir. İlgili yazılım koşulunu GPL lisans koşullarını izlemek için kullanabilirsiniz.
İlgili GPL lisans koşullarını buradan inceleyebilir, yazdırabilir ve indirebilirsiniz. TP-Link ürünlerinde kullanılan ilgili yazılımın GPL kaynak kodlarını, GPL Kod Merkezi altında GPL yazılım kodunu içeren TP-Link yazılımının bir listesi de dahil olmak üzere, doğrudan indirmek ve daha fazla bilgi almak için alırsınız.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V2_171228
|
|
Published Date: 2018-02-09
|
Language: English
|
File Size: 4.06 MB
|
|
Modifications and Bug Fixes:
Optimize the online-detection mechanism.
Notes:
For TL-WA850RE(US)_V2.0.
|
|
|
TL-WA850RE(US)_V2_171123
|
|
Published Date: 2017-11-23
|
Language: Multi-language
|
File Size: 4.04 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement:
Improved system stability.
Bug fixes:
1. Fixed the WPA2 Security (KRACKs) Vulnerability.
2. Fixed the bug that can’t obtain correct IP in some situation.
|
|
|
TL-WA850RE(US)_V2_160517
|
|
Published Date: 2016-09-18
|
Language: English
|
File Size: 3.72 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement：
1. Added the language selection menu in the up right corner.
2. The default SSID has been changed to TP-LINK_WA850RE.
3. Added Power schedule function and Wi-Fi coverage control function.
4. Added the Access Point mode, which means the device can transform your existing wired network to a wireless network.
5. The popups function is added, which means a web UI of the device would automatically pop out the first time you configure it.
Notes:
For TL-WA850RE(US)2.0
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Güncelleme İçin
ÖNEMLİ: Güncelleme hatalarını önlemek için, güncelleme işlemine devam etmeden önce aşağıdakileri okuyunuz
- Cihaz yazılımı sürümü için, cihazınızın donanım sürümünü doğrulayın. Yazılımın yanlış güncellenmesi cihazınıza zarar verebilir ve garantiyi geçersiz kılabilir. (Normalde V1.x = V1)
Bölgeniz için olmayan bir firmware güncellemesi önerilmemektedir. Bölgenizi seçmek ve en uygun firmware sürümünü indirmek için lütfen burayı tıklayın. (Örneğin, AB’nin ve ABD’nin üretici yazılımı farklı donanım sürümleridir)
- Ürünü kalıcı bir hasara uğratmamak için güncelleme işlemi sırasında gücü KAPATMAYIN.
- Yazılımı kablosuz bağlantı yoluyla GÜNCELLEMEYİN.
- Kullanıcıların bilgisayardaki tüm Internet uygulamalarını durdurmaları veya güncellemeden önce Internet hattını cihazdan çıkarmanız önerilir.
- Güncellemeden önce indirdiğiniz dosyayı ayıklamak için WinZIP veya WinRAR gibi yazılımlar kullanın.
|
TL-WA850RE(EU)_V2_171228
|
|
Yayın Tarihi: 2018-03-07
|
Dil: Çoklu Dil
|
Dosya Boyutu: 4.05 MB
|
|
Modifications and Bug Fixes
Optimize the online-detection mechanism.
|
|
|
TL-WA850RE(US)_V2_171228
|
|
Yayın Tarihi: 2018-02-09
|
Dil: İngilizce
|
Dosya Boyutu: 4.06 MB
|
|
Modifications and Bug Fixes:
Optimize the online-detection mechanism.
Notes:
For TL-WA850RE(US)_V2.0.
|
|
|
TL-WA850RE(US)_V2_171123
|
|
Yayın Tarihi: 2017-11-23
|
Dil: Çoklu Dil
|
Dosya Boyutu: 4.04 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement:
Improved system stability.
Bug fixes:
1. Fixed the WPA2 Security (KRACKs) Vulnerability.
2. Fixed the bug that can’t obtain correct IP in some situation.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE_V1.20_141224_USA
|
|
Published Date: 2014-12-24
|
Language: English
|
File Size: 3.45 MB
|
|
Notes:
1.For TL-WA850RE(USA) V1.20, not applicable for V1.0.
2.If you’re in a region out of United States, please do not upgrade US firmware.Click here to choose your region for the most suitable firmware.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V5_181107
|
|
Published Date: 2018-11-15
|
Language: Multi-language
|
File Size: 4.08 MB
|
|
Modifications and Bug Fixes
1. Optimized the way to access the extender’s web management page via tplinkrepeater.net or www.tplinkrepeater.net
2. Improved the wireless connection stability with back-end client.
3. Improved the wireless connection stability with front-end AP.
4. Improved the system stability.
5. Fixed the connection compatibility issue with a few specific routers.
Notes:
1. For TL-WA850RE V5
|
|
|
TL-WA850RE(US)_V5_180228
|
|
Published Date: 2018-03-30
|
Language: Multi-language
|
File Size: 4.07MB
|
|
Modifications and Bug Fixes
Fixed the compatibility issue with some old versions of MacBook.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(EU)_V7_200731
|
|
Published Date: 2020-08-17
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modification and bug fixes:
1. Fixed the bug that some devices cannot access Internet in some situations.
2. Fixed the bug that some main router may restart when the repeater connects to it.
3. Fixed the bug of having difficulty in connecting to hidden SSID.
4. Fixed the security issue of logging in to the web UI causes a reset of the device.
5. Optimized total performance.
|
|
|
TL-WA850RE(UK)_V7_200403
|
|
Published Date: 2020-04-22
|
Language: Multi-language
|
File Size: 1.23 MB
|
|
Modifications and Bug Fixes:
1. Improve the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(UK)_V7_191212
|
|
Published Date: 2019-12-31
|
Language: Multi-language
|
File Size: 1.62 MB
|
|
Modifications and Bug Fixes:
New features/Enhancement:
1. Optimize the Daylight Saving Time function.
2. Improve the stability and performance of device.
Notes:
1. For TL-WA850RE V7.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(EU)_V7_200731
|
|
Published Date: 2020-08-17
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modification and bug fixes:
1. Fixed the bug that some devices cannot access Internet in some situations.
2. Fixed the bug that some main router may restart when the repeater connects to it.
3. Fixed the bug of having difficulty in connecting to hidden SSID.
4. Fixed the security issue of logging in to the web UI causes a reset of the device.
5. Optimized total performance.
|
|
|
TL-WA850RE(UK)_V7_200403
|
|
Published Date: 2020-04-22
|
Language: Multi-language
|
File Size: 1.23 MB
|
|
Modifications and Bug Fixes:
1. Improve the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(UK)_V7_191212
|
|
Published Date: 2019-12-31
|
Language: Multi-language
|
File Size: 1.62 MB
|
|
Modifications and Bug Fixes:
New features/Enhancement:
1. Optimize the Daylight Saving Time function.
2. Improve the stability and performance of device.
Notes:
1. For TL-WA850RE V7.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V6_200403
|
|
Published Date: 2020-04-24
|
Language: Multi-language
|
File Size: 4.16 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability of device.
2. Enhanced the security of device.
Notes:
1. For TL-WA850RE V6.
|
|
|
TL-WA850RE(US)_V6_191206
|
|
Published Date: 2020-01-14
|
Language: English
|
File Size: 3.66 MB
|
|
New features/Enhancements:
1. Added mamual DHCP settings in web-based management page.
2. Improved Smart DHCP feature.
3. Improved compatibility with some devices.
For TL-WA850RE V6.
|
|
|
TL-WA850RE(US)_V6_190422
|
|
Published Date: 2019-05-07
|
Language: English
|
File Size: 3.77 MB
|
|
1. Fixed the problem that Tether may crash when change LED schedule on the app side.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(UK)_V6_200403
|
|
Published Date: 2020-04-24
|
Language: Multi-language
|
File Size: 4.16 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability of device.
2. Improved the performance of device.
3. Enhanced the security of device.
Notes:
1. For TL-WA850RE V6.
|
|
|
TL-WA850RE(UK)_V6_191206
|
|
Published Date: 2020-01-14
|
Language: English
|
File Size: 3.66 MB
|
|
New features/Enhancements:
1. Added mamual DHCP settings in web-based management page.
2. Improved Smart DHCP feature.
3. Improved compatibility with some devices.
For TL-WA850RE V6.
|
|
|
TL-WA850RE(EU)_V6_190731
|
|
Published Date: 2019-08-29
|
Language: Multi-language
|
File Size: 4.16 MB
|
|
Modifications and Bug Fixes:
1. Optimized the login function.
2. Optimized the display of DNS.
3. Improved the stability of device.
Notes:
1. For TL-WA850RE V6.0
|
|
Відкритий вихідний код для програмістів (GPL)
Наступна інформація призначена для програмістів і не представляє значимість для більшості кінцевих користувачів продукції TP-Link.
Продукція TP-Link містить код, розроблений третіми особами, включаючи код, розроблений відповідно до Універсальної громадської ліцензії GNU (GPL) версії 1 / версії 2 / версії 3 або відповідно до Стандартної громадської ліцензії обмеженого використання GNU (LGPL). Ви можете використовувати відповідне програмне забезпечення на умовах ліцензії GPL.
Ви можете переглянути, роздрукувати і завантажити відповідні умови ліцензії GPL тут. У Центрі вихідних кодів GPL ви отримуєте для завантаження вихідний код GPL відповідного забезпечення, яке використовується в продукції TP-Link, а також іншу інформацію, включаючи список ПЗ TP-Link, що містить вихідний код GPL.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(UK)_V7_200514
|
|
Published Date: 2020-05-25
|
Language: Multi-language
|
File Size: 1.60 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V4_180409
|
|
Published Date: 2018-05-24
|
Language: Multi-language
|
File Size: 4.06 MB
|
|
Modifications and Bug Fixes
1. Fixed the connection compatibility issue with specific models of routers.
2. Fixed the compatibility issue with some old versions of MacBook.
3. Fixed some display issues of the Web UI.
4. Fixed the issue that specific browsers cannot access the web interface via domain under Windows10 OS.
5. Removed the option of turning off wireless signal.
6. Optimized the scanning process of 2.4GHz wireless.
Notes:
1. For TL-WA850RE(EU/UK/FR/DE/US/AU/BR/ES/AR/KR/JP) V4.
|
|
|
TL-WA850RE(US)_V4_171218
|
|
Published Date: 2017-12-21
|
Language: Multi-language
|
File Size: 4.06MB
|
|
Modifications and Bug Fixes:
New Features/Enhancements:
Improved Online detection method and reduced unnecessary data traffic.
|
|
|
TL-WA850RE(US)_V4_171116
|
|
Published Date: 2017-11-16
|
Language: Multi-language
|
File Size: 4.06 MB
|
|
Modifications and Bug Fixes:
Bug fixes:
Fixed the WPA2 Security (KRACKs) Vulnerability.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
