450mbps wireless n access point

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

To Upgrade

Ac1750 wireless dual band gigabit router

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND_V1_100429_Beta

Published Date: 2010-04-29

Language: อังกฤษ

File Size: 2.535 MB

Modifications and Bug Fixes:

Fixed a bug in Multi-SSID mode that the AP cannot forward the packets which are bigger than 1514 bytes.
Beta firmware.

TL-WA901ND_V1_100408

Published Date: 2010-04-08

Language: อังกฤษ

File Size: 2.485 MB

Modifications and Bug Fixes:

Improve the throughput when work at bridge mode.
Fix a bug that the AP can´t connect to a remote AP which doesn´t broadcast SSID when work at client mode.

Notes:

For TL-WA901ND

TL-WA901ND_V1_100222

Published Date: 2010-02-22

Language: อังกฤษ

File Size: 2.484 MB

Modifications and Bug Fixes:

Fix a bug that when working at Multi SSID mode and the VLAN function is enabled, the AP can´t be logged on.
Fix a bug that if DHCP function is enabled, but there is no DHCP server connected to the LAN port, the AP can´t be logged on.
Improve the wireless throughput when working at Repeater mode.

Notes:

For TL-WA901ND

Open Source Code For Programmers (GPL)

Ac1900 wireless mu-mimo gigabit router

Open Source Code For Programmers (GPL)

Nano адаптер powerline стандарта av500

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND(EU)_V5_160929

Published Date: 2016-09-09

Language: English

File Size: 3.53 MB

Modifications and Bug Fixes:

First firmware released.

Notes:

1. For TL-WA901ND(EU) V5.2. It is NOT suggested to upgrade firmware which is not for your region. If this site is not for your region, please click here to choose your own region and download the most suitable firmware version.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND_V3_150409

Published Date: 2015-04-09

Language: English

File Size: 3.25 MB

Modifications and Bug Fixes:

Bug Fixed:

Fixed the directory traversal security bug.
Fixed the bug that the LAN getway does not take effect when TL-WA901ND is in Client mode.
Fixed a display error in the WDS scanning result page.
Fixed the bug that chromecast cannot work with TL-WA901ND.

Notes:

For TL-WA901ND(UN) V3
Your device’s configuration will be lost after upgrading, which means you need to configure your device again after upgrading.

TL-WA901ND_V3_141030

Published Date: 2014-10-30

Language: English

File Size: 3.52 MB

Modifications and Bug Fixes:

New Features/Enhancement：(1) Added Logout option to logout after configuration .(2) only allowed one user to login the management webpage at the same time. (3) Improved the security mechanism, enhanced the ability to prevent the XSS and DoS attack. (4)Optimized the remote access module, interface display and the performance of Smart IP.
Bug Fixed：(1) Fixed a bug that the remote access function would not affect till a reboot. (2)Fixed an issue that some Samsung Smart TV can’t get Internet access when connected to TL-WA901ND in Client mode. (3)Fixed a bug that the Broadcasting packet can’t be transmitted from LAN to WLAN in Multi-SSID mode.(4)Fixed a bug that the channel display was incorrect in Bridge with AP mode.

Notes:

For TL-WA901N(UN) V3

TL-WA901ND_V3_130828

Published Date: 2013-08-28

Language: English

File Size: 3.50 MB

Modifications and Bug Fixes:

Added gateway option under LAN section.
Added «Allow remote access» option.
Romoved the function of logining the management page with any domain.

Notes:

For TL-WA901ND V3

Open Source Code For Programmers (GPL)

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND_V2_130131_beta

Published Date: 2013-01-11

Language: English

File Size: 2.50 MB

Modifications and Bug Fixes:

Fixed the wireless instability and hang issue

Notes:

This is a beta firmware

TL-WA901ND_V2_120224

Published Date: 2012-02-24

Language: English

File Size: 2.71 MB

Modifications and Bug Fixes:

Fixed the bug that it can’t forward multicast packets when it works in AP Client/Universal Repeater mode;
Fixed the bug that only when 4 SSID are used can VLAN function take effort;
Added more IGMP group to support more applications.

Notes:

For TL-WA901ND V2 only

TL-WA901ND_V2_110214

Published Date: 2011-02-14

Language: English

File Size: 2.603 MB

Modifications and Bug Fixes:

Fix a bug that the backup file can change the MAC address;
Make the APC has the same MAC address with AP in Repeater mode;
Fix a bug that the Windows 7 system may ask for username and password if AP is in Repeater mode with WEP security;
Fix a bug that if a wireless PC connect 802.1x radius server through it, it will cut the connection in short time;
Fixed a bug in Multi-SSID mode that the AP cannot forward the packets which are bigger than 1514 bytes.

Notes:

For TL-WA901ND V2

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND(US)_V5_160929

Published Date: 2016-09-29

Language: English

File Size: 3.47 MB

Release note：

Modifications and Bug Fixes:

First firmware released.

Notes:

1. For TL-WA901ND(US) V5.

TL-WA901ND(EU)_V5_160929

Published Date: 2016-09-09

Language: English

File Size: 3.53 MB

Modifications and Bug Fixes:

First firmware released.

Notes:

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND_V2_130131_beta

Published Date: 2013-01-11

Language: English

File Size: 2.50 MB

Modifications and Bug Fixes:

Fixed the wireless instability and hang issue

Notes:

This is a beta firmware

TL-WA901ND_V2_120224

Published Date: 2012-02-24

Language: English

File Size: 2.71 MB

Modifications and Bug Fixes:

Fixed the bug that it can’t forward multicast packets when it works in AP Client/Universal Repeater mode;
Fixed the bug that only when 4 SSID are used can VLAN function take effort;
Added more IGMP group to support more applications.

Notes:

For TL-WA901ND V2 only

TL-WA901ND_V2_110214

Published Date: 2011-02-14

Language: English

File Size: 2.603 MB

Modifications and Bug Fixes:

Fix a bug that the backup file can change the MAC address;
Make the APC has the same MAC address with AP in Repeater mode;
Fix a bug that the Windows 7 system may ask for username and password if AP is in Repeater mode with WEP security;
Fix a bug that if a wireless PC connect 802.1x radius server through it, it will cut the connection in short time;
Fixed a bug in Multi-SSID mode that the AP cannot forward the packets which are bigger than 1514 bytes.

Notes:

For TL-WA901ND V2

Open Source Code For Programmers (GPL)

Código Open Source para Programadores (GPL)

Nota: Os produtos TP-Link contêm parcialmente código de software desenvolvido por terceiros, incluindo software que foi submetido ao GNU General Public License («GPL»), Versão 1/Versão 2/Versão 3 ou GNU Lesser General Public License («LGPL»). Pode utilizar a respetiva condição de software seguindo os termos da licença GPL.

Pode rever, imprimir e efetuar o download dos respetivos termos da licença GPL aqui. Terá acesso ao Código Fonte GPL dos respetivos softwares utilizados nos produtos TP-Link para download e investigação, incluindo a lista de software TP-Link que contêm software GPL ao abrigo do Centro de Código GPL.

ДЛЯ ОБНОВЛЕНИЯ

ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления. Проверьте соответствие аппаратной версии и версии ПО

Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)

Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)

НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.

НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением.

TL-WA901ND_V3_150409

Дата публикации: 2015-04-09

Язык: Английский

Размер файла: 3.25 MB

Modifications and Bug Fixes:

Bug Fixed:

Fixed the directory traversal security bug.
Fixed the bug that the LAN getway does not take effect when TL-WA901ND is in Client mode.
Fixed a display error in the WDS scanning result page.
Fixed the bug that chromecast cannot work with TL-WA901ND.

Notes:

For TL-WA901ND(UN) V3
Your device’s configuration will be lost after upgrading, which means you need to configure your device again after upgrading.

TL-WA901ND_V3_141030

Дата публикации: 2014-10-30

Язык: Английский

Размер файла: 3.52 MB

Modifications and Bug Fixes:

New Features/Enhancement：(1) Added Logout option to logout after configuration .(2) only allowed one user to login the management webpage at the same time. (3) Improved the security mechanism, enhanced the ability to prevent the XSS and DoS attack. (4)Optimized the remote access module, interface display and the performance of Smart IP.
Bug Fixed：(1) Fixed a bug that the remote access function would not affect till a reboot. (2)Fixed an issue that some Samsung Smart TV can’t get Internet access when connected to TL-WA901ND in Client mode. (3)Fixed a bug that the Broadcasting packet can’t be transmitted from LAN to WLAN in Multi-SSID mode.(4)Fixed a bug that the channel display was incorrect in Bridge with AP mode.

Notes:

For TL-WA901N(UN) V3

TL-WA901ND_V3_130828

Дата публикации: 2013-08-28

Язык: Английский

Размер файла: 3.50 MB

Modifications and Bug Fixes:

Added gateway option under LAN section.
Added «Allow remote access» option.
Romoved the function of logining the management page with any domain.

Notes:

For TL-WA901ND V3

Open Source Code For Programmers (GPL)

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Открытый исходный код для программистов (GPL)

Следующая информация предназначена для программистов и не представляет значимость для большинства конечных пользователей продукции TP-Link.
Продукция TP-Link содержит код, разработанный третьими лицами, включая код, разработанный в соответствии с Универсальной общественной лицензией GNU (GPL) версии 1/версии 2/версии 3 или в соответствии со Стандартной общественной лицензией ограниченного применения GNU (LGPL). Вы можете использовать соответствующее программное обеспечение на условиях лицензии GPL.

Вы можете просмотреть, распечатать и загрузить соответствующие условия лицензии GPL здесь. В Центре исходных кодов GPL вы получаете для загрузки исходный код GPL соответствующего ПО, используемого в продукции TP-Link, а также прочую информацию, включая список ПО TP-Link, содержащего исходный код GPL.

Para atualizar

IMPORTANTE: Para evitar falhas de atualização, leia o seguinte, antes de prosseguir com o processo de atualização

Verifique a versão de hardware do seu dispositivo para a versão de firmware correta. Atualização incorreta de firmware pode danificar o seu dispositivo e anular a garantia. （ Normalmente V1.x = V1）
NÃO é recomendado atualizar o firmware de outra região. Por favor clique aqui escolher a sua região e efetuar o download da versão de firmware adequado. (O firmware EU (Europa) e US (Estados Unidos) dispõe de versões de hardware diferentes)
NÃO desligue a energia durante o processo de atualização, pode causar danos permanentes ao produto.
NÃO atualize o firmware através de ligações Wi-Fi, expeto nos casos onde não dispõe de portas rede LAN/Ethernet no dispositivo TP-Link.
Recomenda-se que os utilizadores interrompam todos os acessos à Internet ou simplesmente desconectem a ligação à Internet do dispositivo antes de efetuar a atualização.
Para extrair o conteúdo com o ficheiro de atualização, recomendamos a utilização de programas de descompressão, como por exemplo, WinZIP, WinRAR ou 7-Zip.

TL-WA901ND(EU)_V5_160929

Data de Publicação: 2016-09-09

Idioma: Inglês

Tamanho: 3.53 MB

Modifications and Bug Fixes:

First firmware released.

Notes:

Open Source Code For Programmers (GPL)

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND_V2_130131_beta

Published Date: 2013-01-11

Language: English

File Size: 2.50 MB

Modifications and Bug Fixes:

Fixed the wireless instability and hang issue

Notes:

This is a beta firmware

TL-WA901ND_V2_120224

Published Date: 2012-02-24

Language: English

File Size: 2.71 MB

Modifications and Bug Fixes:

Fixed the bug that it can’t forward multicast packets when it works in AP Client/Universal Repeater mode;
Fixed the bug that only when 4 SSID are used can VLAN function take effort;
Added more IGMP group to support more applications.

Notes:

For TL-WA901ND V2 only

TL-WA901ND_V2_110214

Published Date: 2011-02-14

Language: English

File Size: 2.603 MB

Modifications and Bug Fixes:

Fix a bug that the backup file can change the MAC address;
Make the APC has the same MAC address with AP in Repeater mode;
Fix a bug that the Windows 7 system may ask for username and password if AP is in Repeater mode with WEP security;
Fix a bug that if a wireless PC connect 802.1x radius server through it, it will cut the connection in short time;
Fixed a bug in Multi-SSID mode that the AP cannot forward the packets which are bigger than 1514 bytes.

Notes:

For TL-WA901ND V2

Open Source Code For Programmers (GPL)

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND_V3_150409

Published Date: 2015-04-09

Language: English

File Size: 3.25 MB

Modifications and Bug Fixes:

Bug Fixed:

Fixed the directory traversal security bug.
Fixed the bug that the LAN getway does not take effect when TL-WA901ND is in Client mode.
Fixed a display error in the WDS scanning result page.
Fixed the bug that chromecast cannot work with TL-WA901ND.

Notes:

For TL-WA901ND(UN) V3
Your device’s configuration will be lost after upgrading, which means you need to configure your device again after upgrading.

TL-WA901ND_V3_141030

Published Date: 2014-10-30

Language: English

File Size: 3.52 MB

Modifications and Bug Fixes:

New Features/Enhancement：(1) Added Logout option to logout after configuration .(2) only allowed one user to login the management webpage at the same time. (3) Improved the security mechanism, enhanced the ability to prevent the XSS and DoS attack. (4)Optimized the remote access module, interface display and the performance of Smart IP.
Bug Fixed：(1) Fixed a bug that the remote access function would not affect till a reboot. (2)Fixed an issue that some Samsung Smart TV can’t get Internet access when connected to TL-WA901ND in Client mode. (3)Fixed a bug that the Broadcasting packet can’t be transmitted from LAN to WLAN in Multi-SSID mode.(4)Fixed a bug that the channel display was incorrect in Bridge with AP mode.

Notes:

For TL-WA901N(UN) V3

TL-WA901ND_V3_130828

Published Date: 2013-08-28

Language: English

File Size: 3.50 MB

Modifications and Bug Fixes:

Added gateway option under LAN section.
Added «Allow remote access» option.
Romoved the function of logining the management page with any domain.

Notes:

For TL-WA901ND V3

Open Source Code For Programmers (GPL)

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND_V1_100429_Beta

Published Date: 2010-04-29

Language: English

File Size: 2.535 MB

Modifications and Bug Fixes:

Fixed a bug in Multi-SSID mode that the AP cannot forward the packets which are bigger than 1514 bytes.
Beta firmware.

TL-WA901ND_V1_100408

Published Date: 2010-04-08

Language: English

File Size: 2.485 MB

Modifications and Bug Fixes:

Improve the throughput when work at bridge mode.
Fix a bug that the AP can´t connect to a remote AP which doesn´t broadcast SSID when work at client mode.

Notes:

For TL-WA901ND

TL-WA901ND_V1_100222

Published Date: 2010-02-22

Language: English

File Size: 2.484 MB

Modifications and Bug Fixes:

Fix a bug that when working at Multi SSID mode and the VLAN function is enabled, the AP can´t be logged on.
Fix a bug that if DHCP function is enabled, but there is no DHCP server connected to the LAN port, the AP can´t be logged on.
Improve the wireless throughput when working at Repeater mode.

Notes:

For TL-WA901ND

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA901ND_V3_150409

Published Date: 2015-04-09

Language: English

File Size: 3.25 MB

Modifications and Bug Fixes:

Bug Fixed:

Fixed the directory traversal security bug.
Fixed the bug that the LAN getway does not take effect when TL-WA901ND is in Client mode.
Fixed a display error in the WDS scanning result page.
Fixed the bug that chromecast cannot work with TL-WA901ND.

Notes:

For TL-WA901ND(UN) V3
Your device’s configuration will be lost after upgrading, which means you need to configure your device again after upgrading.

TL-WA901ND_V3_141030

Published Date: 2014-10-30

Language: English

File Size: 3.52 MB

Modifications and Bug Fixes:

New Features/Enhancement：(1) Added Logout option to logout after configuration .(2) only allowed one user to login the management webpage at the same time. (3) Improved the security mechanism, enhanced the ability to prevent the XSS and DoS attack. (4)Optimized the remote access module, interface display and the performance of Smart IP.
Bug Fixed：(1) Fixed a bug that the remote access function would not affect till a reboot. (2)Fixed an issue that some Samsung Smart TV can’t get Internet access when connected to TL-WA901ND in Client mode. (3)Fixed a bug that the Broadcasting packet can’t be transmitted from LAN to WLAN in Multi-SSID mode.(4)Fixed a bug that the channel display was incorrect in Bridge with AP mode.

Notes:

For TL-WA901N(UN) V3

TL-WA901ND_V3_130828

Published Date: 2013-08-28

Language: English

File Size: 3.50 MB

Modifications and Bug Fixes:

Added gateway option under LAN section.
Added «Allow remote access» option.
Romoved the function of logining the management page with any domain.

Notes:

For TL-WA901ND V3