Download for re200 v1
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
RE200(EU)_V1_171206
|
|
Published Date: 2018-02-09
|
Language: English
|
File Size: 4.65 MB
|
|
Bug fixes:
Fixed the WPA2 Security (KRACKs) Vulnerability.
Notes:
For RE200(EU)_V1
|
|
|
RE200(EU)_V1_170707
|
|
Published Date: 2017-07-07
|
Language: English
|
File Size: 4.66 MB
|
|
Modifications and Bug Fixes:
1. Fix the compatibility problem with 5G signal of some routers.
2. Fix the transmitted power issue in specific condition.
Notes:
For RE200 EU 1.0
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
RE200(UK)_V2_181113
|
|
Published Date: 2018-11-19
|
Language: Multi-language
|
File Size: 7.40 MB
|
|
Modifications and Bug Fixes
1. Fixed the problem that extender cannot scan wireless singal of channel 13 on 2.4GHz.
2. Fixed a compatibility problem with Archer VR900v.
Notes:
1. For RE200 V2.
|
|
|
RE200(UK)_V2_181026
|
|
Published Date: 2018-11-07
|
Language: Multi-language
|
File Size: 7.73 MB
|
|
Modifications and Bug Fixes
1. Optimized the way to access the extender’s web management page via tplinkrepeater.net
2. Optimized the Quick Setup function.
3. Optimized the scanning process of 2.4GHz & 5GHz wireless.
4. Optimized the display of status page
5. Improved the wireless connection stability with back-end client.
6. Improved the wireless connection stability with front-end AP.
7. Improved the system stability.
8. Fixed the issue that extender can’t obtain IP address in a few special situations.
9. Fixed the connection compatibility issue with a few Sky routers.
10. Fixed the wrong display issue on signal lights.
|
|
|
RE200(UK)_V2_180208
|
|
Published Date: 2018-02-27
|
Language: Multi-language
|
File Size: 7.71MB
|
|
Modifications and Bug Fixes
1. Fix the WPA2 Security (KRACKs) Vulnerability.
2. Optimize the online-detection mechanism.
3. Fix the issue that can’t show the wired devices connected to the extender in the status page.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
RE200(US)_V3_190731
|
|
Published Date: 2019-09-30
|
Language: Multi-language
|
File Size: 8.29 MB
|
|
Modifications and Bug Fixes:
New features/Enhancement:
1. Add OneMesh function.
2. Optimize NTP funciton.
3. Improve the stability of device.
Notes:
1. For RE200(US) V3.
|
|
|
RE200(US)_V3_190505
|
|
Published Date: 2019-06-05
|
Language: Multi-language
|
File Size: 8.16 MB
|
|
Modifications:
1.Bugs fixed and stability improved.
|
|
|
RE200(US)_V3_190305
|
|
Published Date: 2019-03-25
|
Language: Multi-language
|
File Size: 7.84 MB
|
|
Modifications and Bug Fixes on 1.0.2:
1.Bugs fixed and stability improved
Notes:
1.For RE200_V3.0
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
RE200(EU)_V4_200708
|
|
Published Date: 2020-08-05
|
Language: Multi-language
|
File Size: 8.12 MB
|
|
Modification and bug fixes:
1. Fixed the bug regarding OneMesh function
2. Fixed some known issues in AP mode
3. Fixed the compatibility issue with connect box in 5GHz band
4. Optimized the detection of RE200 in Tether app in a noisy environment
5. Fixed the bug regarding password setting in Tether app
6. Disabled AP steering when the router’s SSID is different from that of RE200
Note: For RE200（EU/US/UK/JP/BR/EG）4.0
|
|
|
RE200(UK)_V4_200708
|
|
Published Date: 2020-08-05
|
Language: Multi-language
|
File Size: 8.12 MB
|
|
Modification and bug fixes:
1. Fixed the bug regarding OneMesh function
2. Fixed some known issues in AP mode
3. Fixed the compatibility issue with connect box in 5GHz band
4. Optimized the detection of RE200 in Tether app in a noisy environment
5. Fixed the bug regarding password setting in Tether app
6. Disabled AP steering when the router’s SSID is different from that of RE200
Note: For RE200（EU/US/UK/JP/BR/EG）4.0
|
|
|
RE200(UK)_V4_191104
|
|
Published Date: 2019-11-29
|
Language: Multi-language
|
File Size: 7.70 MB
|
|
Bug Fixes:
1. Fixed the bug that OneMesh might not be able to enable after a WPS progress.
Notes:
For RE200(UK)4.0
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
RE200(EU)_V4_20200514
|
|
Published Date: 2020-07-14
|
Language: Multi-language
|
File Size: 7.22 MB
|
|
Modification and bug fixes:
Fixed the bug that RE200 cannot be reset successfully in some situations.
Notes:
For RE200 (EU/US/UK/JP/ES/BR/EG) 4.0
|
|
|
RE200(EU)_V4_191104
|
|
Published Date: 2019-11-29
|
Language: Multi-language
|
File Size: 7.70 MB
|
|
Bug Fixes:
1. Fixed the bug that OneMesh might not be able to enable after a WPS progress.
Notes:
For RE200(EU)4.0
|
|
|
RE200(EU)_V4_20190924
|
|
Published Date: 2019-11-06
|
Language: Multi-language
|
File Size: 8.29 MB
|
|
Modifications and Bug Fixes:
New features/Enhancement:
1. Optimize cloud function.
2. Improve the stability of device.
Notes:
1. For RE200(EU) V4.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
RE200(US)_V1_171205
|
|
Published Date: 2018-03-30
|
Language: English
|
File Size: 4.54 MB
|
|
Modifications and Bug Fixes
Fix the WPA2 Security (KRACKs) Vulnerability.
|
|
|
RE200(US)_V1_170717
|
|
Published Date: 2017-07-17
|
Language: English
|
File Size: 4.66 MB
|
|
Modifications and Bug Fixes:
Modifications and Bug Fixes
1. Fix the compatibility problem with 5G signal of front Router.
2. Fix the transmitted power problem in specific condition.
Notes:
For RE200(US) V1.
|
|
|
RE200(US)_V1_160329
|
|
Published Date: 2016-03-29
|
Language: English
|
File Size: 4.38 MB
|
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
ДЛЯ ОНОВЛЕННЯ
ВАЖЛИВО: Щоб уникнути проблем при оновленні ПЗ, будь ласка, прочитайте наступну інформацію по процедурі оновлення.
Перевірте відповідність апаратної версії і версії ПЗ. Використання невірної версії ПЗ може пошкодити ваш пристрій і анулювати гарантію. (Зазвичай V1.x = V1)
НЕ рекомендується встановлювати версію ПО, не призначену для вашого регіону. Натисніть тут для вибору регіону і завантажте найбільш актуальну версію програмного забезпечення.
- НЕ відключайте живлення під час процесу оновлення, оскільки це може завдати шкоди маршрутизатору
- НЕ оновлюйте ПЗ маршрутизатора по Wi-Fi, за винятком тих випадків, коли це є єдиним можливим способом.
- Рекомендується, щоб всі користувачі припинили використовувати всі інтернет-додатки на комп’ютері або відключили мережевий кабель від клієнтських пристроїв перед оновленням.
|
RE200(EU)_V4_191104
|
|
Дата публікації: 2019-11-29
|
Мова: Багатомовний
|
Розмір файлу: 7.70 MB
|
|
Bug Fixes:
1. Fixed the bug that OneMesh might not be able to enable after a WPS progress.
Notes:
For RE200(EU)4.0
|
|
ДЛЯ ОБНОВЛЕНИЯ
ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления. Проверьте соответствие аппаратной версии и версии ПО
Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.
- НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
- НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
- Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением.
Примечание: Конфигурационные файлы могут быть некорректно установлены на новые версии встроенного ПО, требующие сброса на заводские настройки.
Рекомендации по обновлению ПО: Wi-Fi роутер, Wi-Fi роутер с модемом ADSL2+, Усилитель Wi-Fi сигнала
|
RE200(EU)_V2_181113
|
|
Дата публикации: 2018-11-19
|
Язык: Многоязычный
|
Размер файла: 7.40 MB
|
|
Исправления и улучшения
1. Исправлена проблема, при которой усилитель не мог сканировать сигнал Wi-Fi на 13 канале частоты 2,4 ГГц.
2. Исправлена проблема совместимости с Archer VR900v.
Примечания:
1. Для RE200 V2.
|
|
|
RE200(EU)_V2_181026
|
|
Дата публикации: 2018-11-07
|
Язык: Многоязычный
|
Размер файла: 7.73 MB
|
|
Исправления и улучшения
1. Оптимизирован доступ к настройке услителя сигнала через tplinkrepeater.net
2. Оптимизирована функция Быстрой настройки.
3. Оптимизирован процесс сканирования сетей 2.4ГГц & 5ГГц.
4. Оптимизирована страница Состояния
5. Улучшена стабильность беспроводного соединения с клиентами.
6. Улучшена стабильность беспроводного соединения с корневой точкой доступа.
7. Улучшена стабильность системы.
8. Исправлена ситуация, когда усилитель сигнала не мог получить IP адрес.
9. Исправлены проблемы подключения к роутерам Sky.
10. Исправлена проблема неверного отображения индикаторов.
|
|
|
RE200(EU)_V2_180412
|
|
Дата публикации: 2018-05-11
|
Язык: Многоязычный
|
Размер файла: 7.71 MB
|
|
Исправления и улучшения
1. Оптимизирован процесс сканирования сетей 5 ГГц.
2. Улучшена стабильность подключения iOS устройств.
3. Улучшена совместимость с приложением Tether App.
4. Исправлена проблема передачи мультикаст трафика.
5. Исправлены проблемы подключения к некоторым роутерам.
6. Исправлена проблема совместимости с некоторыми браузерами при входе в настройки устройства.
7. Исправлена проблема совместимости со старыми версиями MacBook.
Примечание:
1. Для RE200(EU/UK/US/ES/CA/AR/ID) V2.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Programcılar İçin Açık Kaynak Kodu (GPL)
Aşağıdaki bilgiler programcılar içindir ve çoğu TP-Link ev kullanıcısı için gereksizdir.
TP-Link’in ürünleri kısmen GNU Genel Kamu Lisansı («GPL»), Version 1 / Version 2 / Version 3 veya GNU Lesser General Public License’a («LGPL») tabi yazılım kodu da dahil olmak üzere, üçüncü şahıslar tarafından geliştirilen yazılım kodunu içerir. İlgili yazılım koşulunu GPL lisans koşullarını izlemek için kullanabilirsiniz.
İlgili GPL lisans koşullarını buradan inceleyebilir, yazdırabilir ve indirebilirsiniz. TP-Link ürünlerinde kullanılan ilgili yazılımın GPL kaynak kodlarını, GPL Kod Merkezi altında GPL yazılım kodunu içeren TP-Link yazılımının bir listesi de dahil olmak üzere, doğrudan indirmek ve daha fazla bilgi almak için alırsınız.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
RE200(EU)_V4_20200514
|
|
Published Date: 2020-07-14
|
Language: Multi-language
|
File Size: 7.22 MB
|
|
Modification and bug fixes:
Fixed the bug that RE200 cannot be reset successfully in some situations.
Notes:
For RE200 (EU/US/UK/JP/ES/BR/EG) 4.0
|
|
|
RE200(US)_V4_20200514
|
|
Published Date: 2020-07-14
|
Language: Multi-language
|
File Size: 7.22 MB
|
|
Modification and bug fixes:
Fixed the bug that RE200 cannot be reset successfully in some situations.
Notes:
For RE200 (EU/US/UK/JP/ES/BR/EG) 4.0
|
|
